Shure MXA902

Shure Microflex Advance MXA902 is a single-unit ceiling solution that combines a ceiling array microphone and a loudspeaker for small to medium meeting spaces. It is designed for fast installation and predictable results without complex manual tuning. 

Single-Zone Automatic Coverage provides an out-of-box pickup area of 20 × 20 ft (6.1 × 6.1 m) and automatically captures talkers within that zone. Autofocus continuously refines pickup in real time as people shift position or stand, and the coverage zone can be moved up to 4 ft (1.2 m) in any direction to align with the seating area. 

Built-in IntelliMix DSP delivers a clean signal to the far end (AEC, noise reduction, automix, AGC, EQ and more), while the integrated loudspeaker provides natural speech playback within the same area. Audio and power run over a single Ethernet cable using PoE+ and Dante or AES67, with setup and control via Shure Designer or the device web interface. 

Key features:

• Mic array + loudspeaker in one ceiling unit
• Single-zone auto coverage for 20 × 20 ft (6.1 m) areas
• IntelliMix DSP with AEC, NR, automix, AGC and EQ
• Dante and AES67 network audio over Ethernet
• PoE+ Class 4 for power and network connectivity
• Shift coverage zone up to 4 ft (1.2 m) as needed
• Ceiling, VESA, pole or suspension mounting options

Coverage

• Coverage type: single-zone automatic
• Coverage area: 20 × 20 ft (6.1 × 6.1 m)
• Coverage shift: up to 4 ft (1.2 m) in any direction
• Recommended talker-to-mic distance: up to 16 ft (4.9 m)
• Recommended mounting height: up to 10 ft (3 m) 

Microphone

• Microphone elements: 113 MEMS
• Frequency response: 125 Hz–20 kHz
• Sensitivity (1 kHz): −1.74 dBFS/Pa
• Max SPL: 95.74 dB SPL
• SNR: 75.76 dB (A-weighted)
• Self noise: 18.24 dB SPL-A
• Dynamic range: 77.5 dB
• Dante/AES67 output: 1 channel, 48 kHz / 24-bit
• Latency (excluding Dante): 26.6 ms
• IntelliMix DSP: automix, AEC, NR, AGC, compressor, delay, 4-band PEQ, mute, gain (140 dB range)
• AEC tail length: up to 250 ms 

Loudspeaker

• Built-in loudspeaker: 2.5" wide-dispersion
• Dante/AES67 input: 2 channels (summed to loudspeaker)
• Frequency range (−10 dB): 120 Hz–20 kHz
• Max SPL at 1 m: 86 dB SPL (pink noise), 88 dB (1 kHz sine)
• Coverage angle: 80°
• Speaker DSP: delay, compressor, signal generator, 4-band PEQ
• Latency (excluding Dante): 6.3 ms 

Network ? Power

• Power: PoE+ (Power over Ethernet Plus), Class 4
• Max power consumption: 24 W
• Port: RJ45; cable: Cat5e or higher (shielded recommended)
• Audio protocols: Dante, AES67
• Note: with PoE only, the microphone works but the loudspeaker does not 

Control & Indication

• Control: Shure Designer or web application (via Shure Update Utility)
• Routing: Designer (auto route) or Dante Controller
• LED status panel with adjustable color/brightness 

Mounting

• Options: ceiling grid, VESA MIS-D (100 mm), NPT pole mount, cable suspension, 3/8" threaded rod, ceiling mounting kit
• Safety tether attachment points 

Physical & Environment

• Finish: white, paintable
• Plenum rating: UL2043
• Dust protection: IP5X
• Operating temperature: −6.7 to 40 °C; storage: −29 to 74 °C
• Dimensions:
• MXA902-S: 603.8 mm edge-to-edge, 56.04 mm height, 10.5 mm flange
• MXA902-S-60CM: 593.8 mm edge-to-edge, 56.04 mm height
• Weight: 5.8 kg 

Package сontents

• MXA902-S or MXA902-S-60CM
• Mounting kit: zip ties (8), strain-relief tabs (3), rubber feet